|
[Water Feature Pumps] [Portable Dewatering] [Wastewater] [Sewage] [Effluent]
Sewage & Wastewater Pumps
FEATURES
 | Semi-open, Single vane, (1 HP - 5 Hp.), impellers with field
adjustable/replaceable shear plate and, Enclosed Multi-vane, (7 1/2 - 300
Hp.), impellers, with field adjustable / replaceable wear plate provides for
high wear resistance and enhanced solids handling capability. |
| Highly efficient, continuous duty air filled, copper wound motor with
class E, B, F insulation minimizes the cost of operation. |
| Built in thermal protection prevents motor failure due to overloading,
accidental run-dry and single phasing in three phase units. |
| Double inside mechanical seals with silicon carbide faces, running in an
oil filled chamber, equipped with an oil filter, - (2Hp. & above) and further
protected by an exclusionary oil seal(s), Provides for the most durable seal
design available. |
| Double shielded, permanently lubricated, high temperature C3 ball bearings
rated for a B-10 life of 60,000 hours provide for extended operational life. |
APPLICATIONS
| Commercial, Industrial sewage, wastewater, or effluent transfer. |
| Decorative fountains and aquiculture. |
| Raw water supply from rivers or lakes. |
| SPECIFICATIONS |
STANDARD |
OPTIONS |
| Discharge Size |
2" - 32" (50-800 mm) |
Dry-Pit |
| Horsepower Range |
1 Hp. - 300 Hp. (.75kW - 220 kW) |
|
| Performance Range |
| Capacity |
25 - 33,000 G.P.M. (.09-125m3/min) |
| Head |
6.6 Ft. - 278 Ft. (2 ~ 84.7m) |
| Maximum water temperature |
104º
F. (40º C.) |
| Materials of Construction |
| Casing (upper)/(lower) |
Cast Iron, ASTM 48 Class 35 |
304/316 SS (BQ- Series) |
| Impeller |
Cast Iron, ASTM 48 Class 35 |
304/316 SS (BQ- Series) |
| Shaft |
403, 420 Stainless Steel |
304/316 SS (BQ- Series) |
| Motor Frame |
Cast Iron, ASTM 48 Class 30 |
304/316 SS (BQ- Series) |
| Fasteners |
304 Stainless Steel |
304/316 SS (BQ- Series) |
| Mechanical Seal |
|
| Upper Seal |
Silicon Carbide/Silicon Carbide |
| Lower Seal |
Silicon Carbide/Silicon Carbide |
| Elastomers |
NBR (Nitril Buna Rubber) |
Viton (BQ- Series) |
| Impeller Type |
Semi-open, Enclosed, solids handling. |
|
| Solids Handling Capability |
up to 6" non compressible |
| Bearings |
Pre-lubricated, Double Shielded |
| Motor Nomenclature |
| Type, Speed, Hz |
Air filled, 3600, 1800, 1200, 900, 600, 514, &
400 Prm, 60 Hz. |
Nema 3R inverter available for 230
V., 1 Ph. operation from 2 - 5 Hp. |
| Voltage, Phase |
115 or 230 1 Phase (1 Hp)
208/230 or 460 V., 3 Phase |
| Insulation |
Class E, B, F |
|
| Accessories |
Submersible Power Cable 32' (10 m) |
Length as required.
TO/TOS Slide Rail System |
| Operational Mode |
Manual |
Automatic or Alternating (1 - 5 Hp.) |
Call or email us to find a dealer near you.
|
