|
6 Electric Manure Transfer Pumps |
[Click
for Brochure] |
 |
The 6
electric manure transfer pump is designed to
agitate and pump milking parlor wastewater and
hog manure with fast results. The lower
agitation nozzle will quickly agitate a small to
medium sized reception pit and will transfer
manure through a 4 PVC pipe up to several
hundred feet (depending on elevation).
The 6
diameter impeller can agitate liquid at a rate
of up to 480 GPM with a 5 HP electric motor. An
oil-filled lower bearing assembly, with
greasable seals, insures a long operating life.
The 6 manure transfer pump is available in 4
through 18 lengths. |
|

|
|
8 Electric Manure Transfer Pumps |
[Click
for Brochure] |
|
|
For more
demanding wastewater or hog manure pumping jobs,
the 8 Vertical Pump is the right choice. This
pump is the big brother of the 6 Vertical
Pump, offering faster pumping and a bigger inlet
that can handle minor debris. The belt drive is
available in two speeds, for use with either a
7.5HP or 10HP motor. The square discharge tube
adds extra rigidity.
The
lower agitation nozzle rotates 270 degrees for
thorough mixing of small to medium sized
reception pits. And like all Jamesway pumps, the
oil-filled lower bearing assembly with
greaseable seals assures long life. The Jamesway
8 Vertical Pump is available in 4 through 18
lengths.
|
|

|
|
12 - 16 Electric Manure Transfer Pumps |
[Click
for Brochure]
|
 |
The
12 and 16 electric manure transfer pumps are
designed to agitate and pump out manure
reception pits with minimum hassle and maximum
performance. Available in lengths from 6 to
16, and equipped with a 12 or 16 diameter
impeller, our manure pumps can be equipped with
a wide variety of electric motors (7.5-40 HP) to
get the job done fast and easy.
Standard equipment includes twin agitation
nozzles that rotate 270 degrees and a reliable
triple sealed oil-bath lower bearing. Choose
either a stationary floor mount or a
sliding/tilting mount that allows for fast, easy
installation and servicing. |
|

|
|
20 Electric Transfer Pumps |
[Click
for Brochure] |
 |
20
electric manure transfer pump is designed to
agitate large manure reception pits and transfer
up to 500 to long-term storage. Available in
lengths from 6 to 16, these pumps can be
equipped with a 50, 75 or 100 HP electric motor
to provide maximum pumping efficiency and
performance.
Standard equipment includes twin agitation
nozzles that rotate 270 degrees and a reliable
triple sealed oil-bath lower bearing. Choose
either a stationary floor mount or a
sliding/tilting mount that allows for fast, easy
installation and servicing. |
|

|
|
Electric Prop Agitator |
[Click
for Brochure] |
 |
The
Jamesway Electric Prop Agitator is used in
reception pits to chop and blend bedding and
manure into an easy-to-pump liquid. The back
edge of the propeller is machined to scissor
material against the hardened stationary knife
edges and so reduces bedding length. The
propeller may be aimed in any direction during
operation for thorough agitation.
The
high speed 20 inch diameter propeller produces a
strong, concentrated stream of manure. The
Jamesway Electric Prop Agitator may be equipped
with a 7.5, 10 or 15HP motor according to the
size of the reception pit. With larger motors,
the higher speed on the propeller produces a
higher volume stream that reaches further.
The
propeller is mounted on an oversized gearbox,
assuring long life. The gearbox is continuously
charged with oil from the reservoir, and the
output seals are greased by remote lines. The
heavy square-tube body and high quality drive
system with fiberglass shield have been used for
many years in the 12 & 16 vertical pumps.
These pumps are famous for durability, often
with motors up to 40HP, so why would you want
anything less? The Jamesway Electric Prop
Agitator is first class from top to bottom.
[Back
to the Top] |
|

|
|
Flush Pump |
[Click
for Brochure] |
|
|
Jamesway
offers a variety of pumps for special
applications such as floor flushing, transfer of
separated liquids and tanker loading. With
features like the oilbath lower bearing chamber
and remote greasing on the lower seals, these
pumps use the same heavy duty construction found
in all Jamesway pumps. Choose from 6 or 8
discharge, and from a wide selection of fittings
to suit your needs. |