THE WATER, MANURE AND WASTE MANAGEMENT SOLUTIONS COMPANY
|
THE WATER, MANURE AND WASTE MANAGEMENT SOLUTIONS COMPANY
|
|
Tsurumi's water control technology plays a key role to creating comfort engineering which is considerate of both man and the planet. Ever since its foundation in 1924, Tsurumi Mfg. Co., Ltd. has been dedicated to creating and developing water use and control techniques. Today Tsurumi has become Japan's largest submersible pump manufacturer turning out products which are admired all over the world for it's first-rate hydronamic expertise. What underlies Tsurumi's steady technological and commercial developments is its ideal to be a business which contributes to the benefit of global and human society. Now with the new millennium unfolding Tsurumi is making renewed efforts to
build pumps which will not only answer the needs of all relevant industries.
They also must respond to the calls of the people in
all countries who would benefit from efficient water use and control -- for many
years to come -- by virtue of Tsurumi's environment-friendly pump-making
technology.
Tsurumi pumps are not damaged by running dry. DEALER ENQUIRES WELCOME
Features & BenefitsGeneral Tsurumi produces more submersible pumps per year than any other submersible pump manufacturer in the world. (500,000 units per year.) Tsurumi offers over 1800 different models of submersible pumps. Other products
offered for the sewage and wastewater industry: Tsurumi's Goal of producing only the most overall efficient, highest quality and environment friendly products is illustrated in the following ways. Utilization of higher quality materials enables Tsurumi to produce
submersible pumps that will outlast other pumps that are offered in today's
market. Tsurumi's research and development department is involved in an
ongoing program to develop new and superior materials for pumping
applications.
Tsurumi utilizes only the highest
Engineering, Design and Test Standards and will not compromise
them for in order to obtain a competitive edge.
It is important to note that there are many other factors that affect abrasion ratios, however the above illustration indicates that the overall velocity through the Tsurumi pump is lower and therefore wear rates due to erosion and scouring will be lower. In addition, the discharge pipe size specified by the engineer will more than likely match the discharge size supplied by Tsurumi, eliminating the need for a discharge increaser, reduces the cost of installation and increases the efficiency of the system by reducing friction loss. Standard Design Features eliminate common problems encountered in wastewater and sewage applications. Dual Inside Mechanical Seals with Silicon Carbide located in a corrosion free oil filled chamber eliminates or minimizes the following problems. (Pressure rating of 1.5 times shut off pressure)
Seal pressure relief ports provided on pumps designed to exceed 98' of head at shut off.
Lip seals or "V" Rings locate between pumpage and lower seal faces offers added protection from abrasive particles. Oil Lifter, (Patent Pending) is supplied as standard on all pumps 1 Hp. and larger. assures lubrication of the top seal faces down to 1/3 of the standard oil level in the oil chamber.
Air relief valve, supplied as standard on all side discharge pumps prevents air locking. Circle Thermal Protector or Miniature Thermal Protectors are provided on all three legs in three phase units and in the primary winding of single phase units. Prevents motor failure due to overloading, single phasing, (in three phase units) or phase imbalance. Cable entrance with combination thermal expansion boot and anti-wicking block.
*Replacement power cables for these units must be purchased from Tsurumi. |
|
For Canadian inquires call
877-312-4600 or email us at
info@bliquidtech.com .
|
