|
|
Cabinet and Two Tank Water
Softeners |
|
Cabinet
Style
|
Two Tank Style
5600
Valve
|
Two Tank Style
2510
Valve
|
CSI Residential Water
Softeners are designed to
reduce the negative effects of hard water (calcium and magnesium
minerals). Examples of these effects are calcium / magnesium build-up and
spotting of fixtures, increased soap and detergent usage, soap scum
build-up and a 20% to 30% increase in energy consumption to heat water,
just to name a few.
CSI Water
Softeners are manufactured
from the finest components available and include such amenities as bypass
valves, 3/4" FNPT Nickel Plated Brass Yoke Connections, 18" x 33" Round
Brine Tanks, Salt Grid Plates, Safety Floats, Brine Well and Caps and
Safety Overflow Fittings.
Available in the
appliance like cabinet style or the more popular two-tank model,
regeneration is precisely controlled by the reliable Fleck 5600 or 2510
Control Valve. Optional Control Valves available include the Fleck 5600SE
Electronic, 2510 Manual and Autotrol 255. All control valves offered are
available in either timeclock or demand versions.
All units are
available with standard 1" riser type distributors or turbulators, which
provide a rigorous backwash during regeneration.
Other options
available include 1" N.P. Brass Yoke Connections, 3/4" and 1" MNPT Plastic
Yoke Connections, 18" x 40" Round and 11" x 11" Square Brine Tanks.
Cabinet Style
Softeners come in 24,000 and 32,000 grain capacities with flow rates of 8
gpm and 11 gpm, respectively. Two-Tank models range from 24,000 to 96,000
capacity and flow rates from 8 gpm to 14 gpm.
Top |
|
 
|
|
 
|
|
Alternating Twin Water
Softeners |
|
|
CSI Alternating Twin Water Softeners are the
Cadillac of the softening industry.
Utilizing the Fleck 9000
Control Valve, this versatile model softens water through one resin tank
while a second resin tank remains in a stand-by mode. When the integral
water meter indicates a need to regenerate, the stand-by tank
automatically is put on line to provide uninterrupted soft water while the
exhausted resin tank is regenerated. This freshly regenerated tank will
then remain in stand-by until the meter triggers another regeneration.
Most standard control valves are designed to bypass untreated water to the
home during the regeneration cycle. This is why conventional softeners are
programmed to regenerate at times of no water usage (usually at
night).
The Alternating Twin Softener from CSI can
regenerate anytime, day or night, without hard water breakthrough. And
because soft water is always available, regeneration is accomplished with
treated water, keeping the resin bed cleaner than conventional softeners.
All units are available with standard 1" riser type distributors or
turbulators, which provide a rigorous backwash during regeneration. A
bypass valve with 3/4" FNPT Nickel Plated Brass Yoke Connection along with
18" x 33" Brine Tank, Salt Grid Plate, Safety Float, Brine Well and Cap
and Safety Overflow Fitting is included as standard
equipment.
Options available include 1" N.P. Brass Yoke
Connections, 3/4" and 1" MNPT Plastic Yoke Connections, 18" x 40" Round
and 11" x 11" Square Brine Tanks.
Softening capacities range from
24,000 to 96,000 grains with flow rates from 8 gpm to 14 gpm.
Top |
|
|
|
The ELIMINATR Water Treatment
System |
|
|
The ELIMINATR
from CSI is a water softener with a difference. Utilizing fine mesh cation
exchange resin, The ELIMINATR has a much higher capacity for
hardness and iron reduction along with providing sediment and rust
particle filtration. It’s like having a filter and softener in one
system!
The fine mesh resin
bed is supported by special garnet sand providing excellent flow
characteristics and reduced pressure drop.
The ELIMINATR
is extremely efficient providing more capacity per pound of salt and using
less water for regeneration than traditional softeners.
Regeneration is
controlled by the Fleck 2510 Control Valve with the optional Fleck 5600,
5600SE Electronic or Autotrol 255 Valves available. All valves are offered
in either timeclock or demand versions.
Other standard
equipment items include Bypass Valves with 3/4" FNPT Nickel Plated Brass
Yoke Connections, 18" x 33" Round Brine Tank, Salt Grid Plate, Safety
Float, Brine Well and Cap and Safety Overflow Fitting.
Optional equipment
available includes 1" FNPT N.P. Brass Yoke Connections, 3/4" and 1" MNPT
Plastic Yoke Connections, 18" x 40" Round and 11" x 11" Square Brine
Tanks.
The ELIMINATR
capacities range from 26,250 to 70,000 grains with flow rates from 8 gpm
to 12 gpm.
TOP |
|
|
|
 
|
|
Whole House and Economy
Upflow Filters |
|
Whole House
Filter
|
Upflow Filter
w/
Optional Dome
Fill Hole
|
CSI Whole House Water
Filters can solve a wide
range of water quality problems.
With a large
selection of filtration medias to choose from, CSI Whole House
Filters will filter iron, manganese, odor, color, turbidity, suspended
solids, correct low pH (acid water) and remove chlorine from municipal
water supplies.
Standard equipment
includes the Fleck 2510 Control Valve with it’s high backwash capability
and adjustable cycle times along with full 1" Distributor for reduced
pressure drop. Also included, are Bypass Valves and 3/4" FNPT Nickel
Plated Yoke Connections.
Optional 1" FNPT N.P.
Yoke Connections, 3/4" and 1" MNPT Plastic Yoke Connections, Dome Fill
Holes and natural color Mineral Tanks are available.
Models offered range
from 1.0 cubic foot to 3.0 cubic foot with service flow rates of 4.0 gpm
to 9.0 gpm.
CSI Upflow
Filters provide an
economical method for correcting low pH (acid water) or dechlorinating
water supplies, utilizing neutralizer or carbon media. Normal water flow
through the unit travels in an upflow direction thus eliminating the need
for a control valve. This makes the Economy Upflow Filter a very
inexpensive alternative for treating these water problems.
Standard equipment
features 1" FNPT Connections and 1" Distributors. Optional Dome Fill Holes
and natural color Mineral tanks are available. Model sizes are 1.0, 1.5
and 2.5 cubic foot with service flow rates of 4.0 gpm, 5.0 gpm and 8.0
gpm, respectively.
TOP |
|
|
|
Filter Media Selection
Guide |
| Media |
Description |
Handles |
| Neutralizer |
Granular
/ White / Sacrificial to water with pH < 7.0 / Max pH correction
to 7.2 / Lowest pH application 5.8 / Must be replenished about every
3 - 6 months |
Sediment (downflow)
pH
correction |
| Neu-CorÔ |
70%
Neutralizer / 30 % Corosex IIÔ
mix / Sacrificial to water with any pH / max pH correction
determined by contact time used for correction of extremely low PH
down to 5.0 / Must be replenished every 3 - 6
months |
Sediment (downflow)
pH Correction |
| Granular Activated Carbon |
Granular / Black / Wide application for removal of organics
and some inorganics / Must be replaced on a regular basis / Life
expectancy varies based on use |
Sediment
Taste / Odor / Color
Chlorine / Iodine |
| BirmÔ |
Granular / Gray / Must not be used on waters with a pH <
6.8 / Must have dissolved oxygen present at a level of at least 15%
of Iron & Manganese ppm / Max Iron & Manganese level 10 ppm
/ Estimated life about 8 - 10 years |
Sediment
Iron (clear
& red)
Manganese
(clear & red) |
| Filter-AgÔ |
Granular / Off-White / Wide application for removal of
sediment / Life expectancy is unlimited |
Sediment |
| REACTRÔ
Blend |
Granular / White-Black / Blend of Neutralizer, Filter Ag
& Birm / Max life expectancy about
8 - 10 years, but is dependent upon pH |
Sediment
Iron (clear
& red)
Manganese (clear
& red)
Sulfur Particles |
| Corosex
IIÔ |
Semi-round / Off-White / Magnesium Oxide / Extremely reactive
to pH dissolving rapidly adding alkalinity / 30% Corosex II - 70%
Neutralizer is best blend for correcting low pH/ Will raise pH from
lows around 5.0 to as high as 9.0+ / Must be replenished frequently
/ Consult factory with specific application
questions |
Sediment (downflow)
pH Correction
|
| "D" Gravel |
Semi-Round / Brown # 20 Flint / Used as underbed for all
media in all filters providing for excellent flow distribution in
both service and backwash modes / Permanent unless fouled, but can
be cleaned and reused |
Underbed |
|
Filter
media and gravel is shipped in convenient reusable
buckets. | |
|
The REACTRÔ
Water Treatment System |
|
|
CSI Water Treatment
Systems reintroduces air
injection technology with an innovative new approach for the
chemical free treatment of iron, manganese and sulfur gas -
The REACTRÔ. Several new ideas
are incorporated in The REACTRÔ Water Treatment
System. Air injection and free air venting are accomplished through a
common manifold assembly which simplifies installation and service. The
REACTRÔ Manifold Assembly is
mounted on a large air mixing tank that triples the amount of air contact
and exposure time. A full 1" inlet and outlet is provided to install the
REACTR Ô Tank between the well
pump and pressure tank. This exposes The REACTRÔ Tank to full pump
flow for increased air draw, air mixing and reduced plugging problems.
Oxidized contaminants then enter The REACTRÔ Filter where they
are removed by The REACTRÔ Filter. The
REACTRÔ Filter is
automatically maintained by the Fleck 2510 Control Valve that provides the
advantages of adjustable cycle times and high backwash flow capability in
a non-brass valve. Bypass Valve, 3/4" Nickel Plated FNPT Yoke Connections
and 1" Distributor Tubes are standard equipment. Optional 1" N.P. Brass
Yokes, 3/4" and 1" MNPT Plastic Yokes and Dome Fill Holes are
available.
The
OXYCLEANÔ Automatic Cleansing
System is an optional piece
of equipment to enhance the operating performance of the
REACTRÔ System. Situations
that are normally tough to handle and require a high level of maintenance
can now be solved with the OXYCLEANÔ Cleansing
System.
Plugged pipes and
fouled media beds can be the result of low levels of iron or sulfur
bacteria, tannins and high levels of ferric iron. Many times these
situations require a messy, time consuming service call.
Installed in minutes,
The OXYCLEANÔ System will
automatically inject chlorine during every backwash cycle to clean the
entire REACTRÔ and associated
plumbing.
Every
REACTRÔ System built has the
optional OXYCLEANÔ in mind,
installation is easy and can be done during or after installation of the
REACTRÔ without any changes
to the plumbing or electrical wiring.
Top |
|
Aeration
Manifold
|
OXYCLEAN
Option
|
|
2510
Control
|
|
The UT Style REACTRÔ
Water Treatment System |
|
|
The UT Style
REACTRÔ
System operates with all
the efficiency of the standard REACTRÔ, but is designed to
substitute for a standard pressure tank on water well systems. The UT
Style REACTRÔ System can reduce
costs on new water well installations, existing systems when pressure tank
replacement is required, or when space is at a premium. It can also be
used to activate a solenoid and / or Boost Pump for homes that are on
community well type systems. Combine the features of the
REACTRÔ and the pressure
tank in one simple system, and you have the finest water treatment system
on the market today!
The
OXYCLEANÔ Automatic Cleansing
System is an optional piece
of equipment to enhance the operating performance of The UT Style
REACTRÔ System. Situations
that are normally tough to handle and require a high level of maintenance
can now be solved with the OXYCLEANÔ Cleansing
System.
Plugged pipes and
fouled media beds can be the result of low levels of iron or sulfur
bacteria, tannins and high levels of ferric iron. Many times these
situations require a messy, time consuming service call.
Installed in minutes,
The OXYCLEANÔ System will
automatically inject chlorine during every backwash cycle to clean the
entire UT Style REACTRÔ and associated
plumbing.
Every UT Style
REACTRÔ System built has the
optional OXYCLEANÔ in mind,
installation is easy and can be done during or after installation of the
UT Style REACTRÔ without any changes
to the plumbing or electrical wiring.
Top |
|
Aeration
Manifold
|
OXYCLEAN
Option
|
|
2510
Control
|
|
Reverse Osmosis Drinking
Water Systems |
|
CTA-3
|
Reverse Osmosis
(R.O.) is one of the most convenient and economical methods of reducing
unwanted contaminants in your drinking water. Reverse Osmosis is the
process by which water molecules are forced, by water pressure, through a
semi-permeable membrane. Most of the impurities and other contaminants are
rinsed to the drain while the refined water is routed to a special holding
tank.
The
Microline® CTA-3 & TFC-3 Reverse Osmosis Drinking Water
Systems use the latest advances in plastics technology to produce the most
streamlined and user friendly R.O. system on the market. What sets the
Microline® apart from other systems is its patented design.
Injection molded from FDA compliant materials, the system directs the flow
of the water through each filtration step without the need for tubes or
fittings. This design also contains major component parts like the water
saving automatic shut-off, drain control and safety check valve, making it
easy to maintain and service.
Another
Microline® innovation is its patented membrane seal. This
feature makes membrane replacement a snap without the need for tools.
Microline® Reverse Osmosis Drinking Water Systems are validated
by the National Sanitation Foundation under Standard 58, Water Quality
Association (WQA) under Industry Standard S-300-91and by the state of
Wisconsin’s Department of Industry, Labor and Human Relations. Let
Microline® provide the quality water you deserve - you’ll taste
the difference.
TOP |
|
TFC-3
|
|
Nitrate /
Sulfate Systems
|
|
|
CSI Nitrate / Sulfate
Systems are specially
engineered to reduce both nitrates and sulfates in water supplies. Serious
health problems can result for infants under the age of six months if
water containing nitrates is consumed. Animals such as horses, cattle and
sheep can be adversely affected, also.
Nitrate concentration
over 10 mg/l should be treated according to the EPA Safe Drinking Water
Standards.
CSI Nitrate / Sulfate
Systems are designed to
treat all of the incoming water to the home. Utilizing a
special nitrate selective resin, nitrate levels up to 100 mg/l can be
drastically reduced. Standard water softener salt is used to regenerate
the system, so maintenance is minimal.
CSI Nitrate / Sulfate
Systems will also reduce
sulfate levels, which can give the water a medicinal taste and have a
laxative effect on humans.
All systems are
manufactured from the finest components available and include bypass
valves, 3/4" FNPT Nickel Plated Brass Yoke Connections, 1" Distributors,
18" x 33" Round Brine Tanks with salt grid plate, Brine Well and Cap,
Safety Float and Overflow Fittings.
Options available
include 1" FNPT N.P. Brass Yoke Connections, 3/4" and 1" MNPT Plastic Yoke
Connections, 18" x 40" Round and 11" x 11" Square Brine Tanks.
Regeneration is
controlled by the Fleck 2510 Control Valve with optional Fleck 5600,
5600SE Electronic, 2510 Manual and Autotrol 255 Control Valves available.
All control valves offered are available in timeclock or metered
versions.
TOP |
|
|
Optional 5600 |
Optional 5600SE |
|
Tannin / Hardness
Systems |
|
CSI Tannin / Hardness
Systems are designed to
reduce the negative effects of both tannins and hardness. Tannins can
cause a yellow to almost iced tea color to the water. Though
harmless, tannins can cause problem staining of fixtures and laundry.
Hardness (calcium and magnesium minerals) can build up in the hot water
plumbing system, create soap curd (soap scum) and increase energy
consumption when heating water.
CSI Tannin / Hardness
Systems utilize a special
tannin resin and softening resin combined in one tank to reduce these
negative effects and because the system uses standard water softener salt
to regenerate, maintenance is minimal.
CSI Tannin / Hardness
Systems include Bypass
Valves, 3/4" FNPT Nickel Plated Brass Yoke Connection, 1" Distributor, 18"
x 33" Brine Tank with Salt Grid Plate, Brine Well and Cap, Safety Float
and Overflow Fitting as standard equipment. Optional 1" FNPT N.P. Brass
Yoke Connections, 3/4" and 1" MNPT Plastic Yoke Connections, 18" x 40"
Round and 11" x 11" Square Brine Tanks are available.
Regeneration cycles
are controlled by the reliable Fleck 2510 Control Valve with the optional
Fleck 5600, 5600SE Electronic, 2510 Manual and Autotrol 255 controls
available. All control valves offered are available in timeclock or
metered versions.
TOP |
|
|
Optional 5600 |
Optional 5600SE |
|
Ultra Violet Disinfection
Systems |
 |
CSI’s Ultra Violet
Water Disinfection Systems are designed for
residential point of use or point of entry applications.
All models feature
CSI’s all new electronic ballast system. It set’s a new standard in
performance for UV output stability over a wide range of voltage
fluctuations, and provides added peace of mind that the disinfection power
of CSI’s UV System is optimized.
CSI Disinfection
Systems produce 30,000
uw/cm2 of U.V. energy, far exceeding the guidelines currently
specified by the U.S. Government (16,000 uw/cm2) for
residential applications.
Our 304 stainless
steel disinfection chambers are fabricated utilizing plasma arc fusion
welding, unsurpassed for producing strong, food grade, uncontaminated
welds.
CSI U.V. Disinfection
Systems install vertically
or horizontally and the U.V. lamp and quartz sleeve are easily removed for
cleaning and replacement from either end maximizing installation
flexibility.
CSI’s Electronic Lamp
Status System monitors lamp
operation and sounds an alarm if the U.V. lamp goes out. The optional
fail-safe series includes a solenoid to shut off water flow from the unit
in the event of bulb failure, protecting the plumbing system from
contamination.
TOP |
Replacement U.V. Lamp |
Replacement Quartz Sleeve |
|
Commercial /
Industrial Products |
|
 
 |
CSI specializes in the
engineering and manufacture of commercial / industrial water treatment
systems throughout the world.
With flow rates
ranging from 10 gpm to 2,000 gpm and anywhere in between, CSI can
solve your most complex water problems.
Systems available
include Water Softeners, Backwashing Filters, Upflow Filters,
REACTRÔ Aeration Systems,
Continuous or Intermittent Regeneration Greensand Systems, Reverse Osmosis
Systems, Ultra Violet Disinfection Systems and Chemical Feed Systems.
Smaller systems feature the commercial Fleck and Autotrol Series Control
Valves. Our larger systems feature automatic ball and butterfly valves for
high flow rate capability and reliability.
Options included
preplumbing / wiring, skid mounting, polyglass or carbon steel mineral
tanks, Asme code tanks, chlorine, pH, temperature, conductivity, and
KMNO4 monitoring, telemetry and SCADA Systems and much
more.
And with our custom
controls capability we can integrate any pumping, storage and
repressurization / distribution systems with our treatment equipment to
make any project a true water system.
Let CSI assist you
with your next commercial / industrial water project!
TOP |
|
