THE WATER, MANURE AND WASTE MANAGEMENT SOLUTIONS COMPANY

 

[Water Feature Pumps] [Portable Dewatering] [Wastewater] [Sewage] [Effluent]

 

 

(FRP) Effluent Pumps

 

FEATURES

bulletEnclosed, FRP (Fiberglass Reinforced Plastic), impeller provides for high head pumping of effluent or water.
bulletDouble inside mechanical seals with silicon carbide faces, running in an oil filled chamber and further protected by a lip seal, provides for the most durable seal design available.
bulletHighly efficient, continuous duty, air filled, copper wound motor with class E, insulation minimizes the cost of operation.
bulletBuilt in thermal & amperage sensing, protector prevents motor failure due to overloading, single phasing (in three phase units), or accidental run-dry conditions.
bulletDouble shielded, permanently lubricated, high temperature C3 ball bearings rated for a B-10 life of 60,000 hours, extend operational life.
bulletUtilization of application appropriate FRP & stainless steel components increases corrosion resistance in a wide variety of applications.

APPLICATIONS

bulletResidential, commercial, effluent, wastewater and site drainage.
bulletChemical spill containment.
bulletDecorative waterfalls, fountains and fish ponds.
bulletRaw water supply from rivers or lakes.

 SPECIFICATIONS STANDARD OPTIONS
Discharge Size 2" N.P.T. (50mm)   
Horsepower Range 1/3 - 2 Hp. (.2 - 1.52 kW)  
Performance Range   
Capacity 7 - 184 G.P.M. (.026 - .7 m3/min)  
Head 6.5' - 65' (2 - 20 m)  
Maximum water temperature  140º F. (60º C.)  
Materials of Construction   
Casing (upper)/(lower) FRP (ABS + G20) / ABS  
Impeller FRP (ABS + G20)   
Shaft 403 Stainless Steel  
Motor Frame 304 Stainless Steel  
Fasteners 304 Stainless Steel   
Mechanical Seal Silicon Carbide  
Elastomers NBR (Nitril Buna Rubber)  
Impeller Type Enclosed, Multi-vane  
Solids Handling Capability .32 - .88" (8 - 11 mm)  
Bearings Pre-lubricated, Double Shielded  
Motor Nomenclature  
Type, Speed, Hz Air Filled, 3600 Rpm, 60 Hz.  
Voltage, Phase 115 or 230 V., 1 Ph., 230 or 460 V. 3 Ph .2 hp. 230 or 460 V. 3 Ph only.  
Insulation Class E   
Accessories Submersible Power Cable 32' (10 m) Length as Required
Operational Mode   Model A (Automatic), Model AW (Automatic Alternating)
TOS (FRP) Slide rail system

Call or email us to find a dealer near you.

For Canadian inquires call 877-312-4600 or email us at info@bliquidtech.com .
Please include your name, address and telephone number with all enquires so we may serve you better.
Technologies for a Better Tomorrow - TODAY!  

Financing provided in alliance with Farm Credit Canada                                              
       Last modified: 09/18/08